THE GENERATOR AXION FIELD
A.A.Shpilman
The Linear Accelerator - Generator Axion (Spin)
Field
During
six years the set of experiments with by axion fields was executed. But most
important for me were in which it was revealed, that axion field are superseded
by a strong magnetic field, feel a direction of vectorial potential and are
locked in electrical potential. So, the beam axion field of the generator
described in N3/95 is locked in positive
potential approximately in 300V, and the beam axion field of the generator
described in N2/96 is locked in positive
potential approximately in 600V. Was suppose, that one from a component axion field
has a moment of a momentum of translational motion and is capable to feel
electromagnetic fields. Model about a charge-vectorial of a structure of an
electron and proton described in the article "What such dualism?" In N5/95 .
For
check of the given supposition the source axion fields consisting from ferrite
tube in length 12 millimeter, outside diameter 9 and thickness of walls in 1
millimeter was made. Internal and external surfaces tube, covered by a thin
layer of tin, the variable electrical voltage by amplitude in 12V and frequency
of the order 3 MHz moved. On tube there was wind up a toroidal winding from
three orbits. Through a winding passed a variable electric current in phase
with electrical voltage on electrodes and amplitude in 0.3A.
On
idea, in mutual an orthogonal electrical and magnetic field is higher than the
described device, there should be an acceleration unlike charges in one
direction (on a direction of vector Poyting) in walls ferrite tube along its
axis. And the axion field has arisen! And with much greater density of a field
rather than earlier described generators using mechanical rotation or rotation
of electromagnetic fields!
But,
paradox! The beam axion field was generated in a direction to an opposite
direction of vector Poyting!? It means that, if you will excite axion field by
light, the beam axion field will be pulled to a light source (see N2/98). It means that, the axion field partly
represents a flow of pseudo-electrical charges move from the outside to the
generator (shall name it of Z1)!? And in too time the axion field obviously
does not influence motion of electrons.
The
increase of oscillation frequency of electrical voltage on electrodes over optimum,
resulted in deformation of the axion beam leaving the generator (similar of
deformation along a tense string called standing waves of its oscillations),
called by standing waves, length in air of the order 15-20 centimeter. It could
mean that, speed of motion of a flow Z1 along of a axion beam of the order 105
metr/second, and that, somewhere occurs reflection and occurrence of a return
wave, or in the axion field is present a flow (neutral or with much as a
smaller specific electrical charge) move from the generator outside (we shall
name it of Z2) and strongly interacting with a flow Z1.
Have
tried to move phases of change voltage on electrodes and magnetic field in
ferrite tube and have found out that, the maximum of intensity of a axion field
is achieved at coincidence of phases of change of electrical potential on
electrodes with a phase EMF of a self-induction of a toroidal coil. I.e. there
is a direct acceleration of a flow Z1 to the assistance EMF of a coil, and the
voltage on electrodes only rejects a beam in the necessary direction. In this
connection the generator shown on figure1 was made.
|
|
On
of electrodes 3 and 4 the variable voltage of the rectangular form with
amplitude in 12V moved, and on cleat 1,2 toroidal winding in phase submitted
sinusoidal voltage by amplitude 36-45V (12-15V/turn). On an electrode 5 the
constant (reflecting) voltage + 15 - + 60V rather (average value of voltage)
electrodes 3,4 moved. Ferrite tube by the basis fastened to the radiator for
removal of heat arising at its fast magnetic reversal. For decreasing heating
tube, also, was made pulse supply of power with frequency in 20KHz and
porousness 2.
For
the given generator characteristic gate-closing electrical potential in air has
reached +1200-1500 volts. At effect of a beam of axion field of the given
generator on a hand was felt sharp painful effect. In too time the generator
(if is outside of a beam) creates for the man smaller discomfort, than other
versions of the described devices with electromagnetic by excitation. And one
more advantage - the given generator lessis to set-up of frequency of
electromagnetic oscillations.
A lot of interesting was
showed from experiments with the generator (generator "of linear
acceleration" - GLA). For example:
|
|
First,
is similar that, in ferrite the flow velocity Z1 makes 103-104
metr/second, and in air 105-106 metr/second. A difference
on two order. On two order differs both accelerating voltage (12-15V) and
characteristic gate-closing electrical potential in air (+ 1200-1500V). What it
- transformation of a momentum? And besides, the flow velocity Z1 in a
combination to value of gate-closing electrical potential speaks that, ratio of
density of "charge" to specific weight of a flow Z1 (q/m) is rather
close to the appropriate value of a proton! So we accelerate? Protons (through
a solid body!), or its any components? The flow Z1 concerns to two quarks with
a charge + 2/3, and flow Z2 to quark with a charge -1/3? In such case it is
meaningful to name a field not axion, and, for example - as a field quarks!?
Secondly,
the flow Z1 and its behaviour in a transversal electrical field of electrodes
3,4 is possible to try to represent how it is shown on Fig.2. But here there is
a doubt that, the flow Z1 on the way to a nucleus of atom (A) at once in it
falls. The approach is more probable occurs on a spiral as it is shown on Fig.3
and 4. Examining a structure of a field around GLA it is possible to allocate
two characteristic structural components - beam (rod) and precisely outlined
toroid with a ferrite tube in centre. It quite corresponds to model represented
on Fig.3. And still, the implantation of ferromagnetic materials in a zone P1
тороида (see Fig.3) results in increase of density of a field toroid. But,
similar, exists also internal toroid, appropriate to model represented on
Fig.4. And implantation of ferromagnetic materials in a zone P2 results to
increase of density of a field of a beam and appropriate attenuation of a field
external toroid. Implantation in a zone P2 the toroidal coil with the
ferromagnetic core manages in some limits to be changed parameters of a beam
(there can be a beam is extended internal toroid?).
|
|
Fig.4 |
The adduced design can be
improved. For example, proceeding from Fig.2 the idea of increase of a momentum
of a flow Z1 cascade disposing a little GLA by extending them in a chain in one
line and give on them impulses of management in opposite phase arises.
|
|
In
light is higher said, the activity axion field of generators described in the
previous numbers of the almanac is absolutely in another way perceived. So, for
generators using mechanical rotation (N3/95, N2/96, N3/96),
maybe, main the relation of rotation rate to a flow velocity Z1 in environment
of a rotated body is. For magnet-dynamic of the generator (N3/96), maybe, main is EMF of an induction arising
at change of a magnetic field. And the activity of passive resonators (N2/96) will be more clear, if we modify a design
GLA by closing electrodes a little 3,4 how is shown on Fig.5. Thus the voltage
on electrodes 3,4 will be caused only EMF arising at change of a magnetic field
in a ferrite tube, thus the effectiveness of the generator a decrease, but,
nevertheless, it works. Pay attention - electrical circuit: an electrode 3,
conductor 6, electrode 4; is similar to a fragment V - wishbone (passive
resonator N2/96).
On
activity of axion generators, similar, speed of flows Z1 and Z2 in used materials
rather strongly influences. For assessment of a flow velocity in dielectric it
is possible to take advantage of effect of their "latching" of
positive electrical potential. For this purpose the plate dielectric is
necessary for placing between plates of the flat capacitor, through which is
passed a axion beam perpendicularly to plates. Give to on plates the electrical
voltage, is fixed a moment of latching of a beam. Thus plus of voltage moves on
opposite (from a source) plate, and the near plate incorporates with a common
wire (ground or source). For assessment of speed of flows in conductors it is
possible to take advantage of a magnetic field.
In
experiments with GLA received active participation G.P.Ivanov and P.M.Myachin.
Figures S.A.Shpilman
(see N3/95 , N5/95 , N2/96
, N3/96 , N1/98
, N2/98 , N1/99 , N2/99)