Alexandr A.Shpilman (alexandrshpilman78@gmail.com )
Electret film making
Previously, it was proposed to use
an electret film with a positive volumetric charge for storing objects charged
in "places of power" and for shielding "axion fields". Such
a film can be made independently as it is described in the "Shielding package". As a high voltage
source, you can use the circuit described in "Simple
high-voltage source", limiting it to only one TDKS 1. It turns out the
device is similar to that shown in Photo 1.
|
|
|
Photo 1 |
Where the device body 1, a switch 2,
a positive electrode 3, negative electrode 4.
Two cardboard sheets of A3 format
paste over with foil.
|
|
|
Photo 2 |
Sheets 1 are connected by an
electrical conductor 2 and we connect the negative electrode of the
high-voltage generator 3.
Having opened, we put on a sheet 1
film for lamination of paper documents.
|
|
|
|
|
|
We electrify the film by sweeping
over its surface with the positive electrode 3 a high-voltage generator.
|
|
First, we electrify the edges of the
film, and then its middle.
Video how to electrify the film can
be downloaded from https://yadi.sk/i/Te8wZDj58ihKxQ
Electrified film fold and
immediately pass it through the laminator.